BottleNext Entropy - Super Compact PC Case!


Комментарии: 226

  • Guy Bar
    Guy Bar 1 месяц назад

    There is a black version?

  • Giorgos Xristof
    Giorgos Xristof 2 месяца назад

    I was ready to preorder. But then i saw the price! 179€ for this. Oh hell noooo!!!

  • sammich
    sammich 2 месяца назад +1

    €199 is way too expensive. You're better off just buying a garbage can from target and making your own pc case.

  • Scott Williams
    Scott Williams 3 месяца назад

    • add vent holes and a dust screen to the top cap then it can stay on 24/7
    • make sure you could put a 3.5 HDD somewhere
    • make a version that can have a 120mm AIO liquid cooler at the top

  • Matej Mihalič
    Matej Mihalič 3 месяца назад

    Look at that LAN cable, for fucks sake, learn to make the connection right

  • futureboy
    futureboy 3 месяца назад +1

    no clearance on the CPU fan

  • AMDSITHLORD
    AMDSITHLORD 3 месяца назад

    good build

  • Jose Gallegos
    Jose Gallegos 4 месяца назад

    Your desktop icons in some of those b roll shots give me anxiety haha #OCD

  • foxhill153
    foxhill153 4 месяца назад

    2:30 "And the GPU will also be installed vertically, facing down. With that, you are going to have to use a PCIE riser cable, which is going to remotely connect uh your graphics card uh to the motherboard uh directly.." Is it remote or direct? Also this part made me laugh lol

  • Tom Brown
    Tom Brown 4 месяца назад

    Could you fit this case in a bacpack? Really want to get one of these for a portable clean system. Would pair it with an i5, 8gb of ram, and a gtx 1060 mini.

  • Sega Genesis
    Sega Genesis 4 месяца назад

    ur voice is fucking enoying

  • Da_SyEnTisT
    Da_SyEnTisT 4 месяца назад

    You keep telling that the fan should exhaust the hot air out of the box, but each shot of the fan in this video is showing a fan setted up as an intake ...

  • Schawinx
    Schawinx 4 месяца назад

    Can this case fit a 3.5 inch HDD?

  • Ambrose
    Ambrose 4 месяца назад

    My favorite part of the build video is reading the comments of the creator trying to justify his poor design. Also hurling insults at potential customers, amazing.

  • Mr. Q - iLoveQatar.net
    Mr. Q - iLoveQatar.net 4 месяца назад +1

    They should put a spring on the lid that rises when you push it down to increase space for airflow

  • Andre Chen
    Andre Chen 4 месяца назад +1

    Hope you guys are....ALDUIN...well..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

  • Toby Mason
    Toby Mason 4 месяца назад

    "remotely connect your graphics card directly" wtf???

  • Custode Della Vita
    Custode Della Vita 5 месяцев назад

    a modular PSU no uh ?

  • Marian Pelmus
    Marian Pelmus 6 месяцев назад

    i think i'll make one, i have the time and materials, why? BECAUSE IS SO GOD DAMN EXPENSIVE

    • ShadowOfDeath24
      ShadowOfDeath24 5 месяцев назад

      just build a simple metal brake and a piece of sheet metal and build a dan case a4 copy lol


  • northern marine
    northern marine 6 месяцев назад +2

    that top fan is intake

    • northern marine
      northern marine 5 месяцев назад

      no, the side with the bracket is the rear of the fan, that fan bracket is on the underside so therefor is an intake


    • ShadowOfDeath24
      ShadowOfDeath24 5 месяцев назад

      wrong its exhaust...the sode with the bracket is the side air will flow from. the side with just the blades is the side that sucks and blows towards the bracket side (the side the fan mounts to that has the wires)


  • Cameron S.
    Cameron S. 6 месяцев назад

    I would rather have the system inverted where the I/O would be on the top and fan on the bottom introducing positive air pressure.

  • johny wijaya
    johny wijaya 6 месяцев назад

    CPU and GPU toaster case.

  • Blue Seiko
    Blue Seiko 6 месяцев назад

    Black cases are out of order, 199€ is a bit steep but i really like the design and you can fit a closed watercooling kit.
    If i don't fine anything i like i might go for this but i kind of lean on to a Streacom F1C atm.

  • Nunya Dambidniss
    Nunya Dambidniss 6 месяцев назад

    A hybrid 1 gb laptop hdd would be my choice for storage;)

    • Aaro Perämaa
      Aaro Perämaa 6 месяцев назад

      Nunya Dambidniss Wont do much with 1gb of storage :P


  • comedyman112
    comedyman112 6 месяцев назад

    ...and never ending cycle

  • Sir Badios
    Sir Badios 7 месяцев назад

    Is the size of this case the same as the Mac Pro? I sure would like to see someone build a hackintosh using this case..

  • Liam Gratehouse
    Liam Gratehouse 8 месяцев назад

    I WANT

    • BottleNext
      BottleNext 8 месяцев назад

      Leave your email adres on our website. We will launch at 19-12-2016.


  • Mattparks
    Mattparks 9 месяцев назад

    Wait, where's the power button?

    • Alex Webster
      Alex Webster 9 месяцев назад

      You press the top of the case to power it. Its kinda like a giant power button.


  • Pvt. Michael J Caboose
    Pvt. Michael J Caboose 9 месяцев назад

    Why are you reviewing a trashcan?

  • DolandTurnup
    DolandTurnup 9 месяцев назад

    Why can I not find this on Kickstarter? I thought this was supposed to be available for pre-order? SHUT UP AND TAKE MY MONEY FFS

  • Jose Guzman
    Jose Guzman 10 месяцев назад

    IM GONNA MAKE IT MY SELF TO HAVE SOME FUN

  • Alex4SiliconValley
    Alex4SiliconValley 10 месяцев назад

    Needs a panel for USB ports and audio.

  • bliglum
    bliglum 10 месяцев назад +6

    At least the Mac Pro looks like a trash can from a high end furniture store.. This looks like a trash can from Ikea.

    • BottleNext
      BottleNext 8 месяцев назад

      You are clueless. The outer shell is pressed into perfect shape. Nothing at Ikea is perfect or of great quality.


    • Timothy Lim
      Timothy Lim 10 месяцев назад

      Spray paint it black, and it's effectively identical.


  • Michael Kan
    Michael Kan 10 месяцев назад

    Clean your desktop man (1:39)

  • TechyRodsWire
    TechyRodsWire 10 месяцев назад

    Where can we buy it? It's just a Kickstarter

  • Dk Filchev
    Dk Filchev 10 месяцев назад

    That fan on top should be facing down. Your GPU and PSU are blowing down and you are sucking that hot air and cooling the CPU with it? Their fans and the top one are sucking against each other and that's stupid. I know that hot air raises but with a fan that big it will not be hard at all to overcome natural convection and cool better your whole system and get a lot less dust accumulation on the internal components.

  • khim sok
    khim sok 11 месяцев назад

    hi could anyone tell it will this case suit MSI GTX1080 gaming x ?

  • ashupashu
    ashupashu 11 месяцев назад

    bottle next reminds me of bottleneck (not trying to be mean)

    • BottleNext
      BottleNext 8 месяцев назад

      Its a wordplay of bottleneck and next. So beyond the bottleneck.


  • Prezla men
    Prezla men 11 месяцев назад

    Vortex pc`s are future

  • Common Sense
    Common Sense 11 месяцев назад

    That is just sad. Not your video, but that bottlenext ...

  • Alienware Gamer ALX
    Alienware Gamer ALX 11 месяцев назад

    The GOOD : the case itself
    The BAD : it s not even on kickstarter, it s only for pre-order and it s €155

  • Ricky Meadows
    Ricky Meadows 11 месяцев назад

    Damn, if they lowered the bottom mounting plate, they could potentially fit a 1080.

  • Andy Luo
    Andy Luo 11 месяцев назад

    Why don't they just make parts of the case mesh?

    • BottleNext
      BottleNext 8 месяцев назад

      Because it doesn't look good. Besides you can cut and drill holes if you want to ruin it.


  • 'Ainoa Manuia
    'Ainoa Manuia 11 месяцев назад +1

    custom cables should help with the clutter, with shorter cable lengths

  • Fa Vang
    Fa Vang 11 месяцев назад

    All it's missing is the 300+CFM Delta fan.

  • Lang Nagooyen
    Lang Nagooyen 11 месяцев назад

    what would be cool if it had room for 2 fans
    then maybe you could fit a fury x and like a 6700k both watercooler
    it would eliminate the throttling

  • LozzerGuide
    LozzerGuide 11 месяцев назад

    Whatever happened to the Dune Case?

    • LozzerGuide
      LozzerGuide 11 месяцев назад

      Bummer. I really wanted one too. I guess that lives this, and if all else fails, the Cryorig option a year or two down the line...


    • Isaac G
      Isaac G 11 месяцев назад

      it died,...in march.


  • OnceAPunAThyme
    OnceAPunAThyme 11 месяцев назад

    Is the case metal? It has been fun watching people modify plastic trash cans but metal is much more appealing, aesthetically and thermally. I am not sure about acoustically. I think something like a Mac pro case, they are using thick/heavy metal. My concern is finding a riser cable for the graphics card, that actually works, reliably or even at all. Huge frustration, on that one. If anyone can recommend one that works reliably, it would be good to hear. I have a lot of stalled projects that were killed off because I couldn't find a riser cable that worked reliably with powerful graphics cards.

  • CyclingMikey
    CyclingMikey 11 месяцев назад +1

    "Desk wires hidden = OCD". This made me chuckle. :D

    • CyclingMikey
      CyclingMikey 11 месяцев назад

      I think it's a sweet case, looks lovely.


  • Anthony Del Valle
    Anthony Del Valle 11 месяцев назад

    Bottlenext? More like bottleneck 😂😂😂

  • Darth Chocolate
    Darth Chocolate 11 месяцев назад +1

    I like it!

  • M Noureldin
    M Noureldin 11 месяцев назад

    Cool, but I think the CPU will suffocate out of air. May be more appropriate when you don't need a GPU, just for browsing and word processing.

  • CheapSushi
    CheapSushi 11 месяцев назад

    I like the exterior much more than the Mac Pro but the internal design of the Mac Pro is BEAUTIFUL. Seriously look at a tear down of it. It's so well done. I never wanted an Apple product, ever. Except for that trashcan. Industrial design wise, in the interior, it's superb. I suppose this with an AMD APU, would be a nice middle ground. Nice job!

  • Aleksey Konovalov
    Aleksey Konovalov 11 месяцев назад +2

    only black!!!!!!!

  • Professional NooB
    Professional NooB 11 месяцев назад +1

    Need to have one of these... and pranking some noobs by telling them i ran Windows in an Apple device!! XD

  • edwin k
    edwin k 11 месяцев назад

    interesting !!Liquid cooled is the best solution.

  • sezebel CHRISTOFFERSON
    sezebel CHRISTOFFERSON 11 месяцев назад

    PC SHOULD NOT BE SELF BUILT BUT MADE AS USER FRIENDLY CLOSED SYSTEM COMPUTERS.

    • Timothy Lim
      Timothy Lim 10 месяцев назад

      Get a Mac damn it.


    • sezebel CHRISTOFFERSON
      sezebel CHRISTOFFERSON 11 месяцев назад

      +Shane Bogdanowitz THEN WHY HAVE PEOPLE REPLIED TO MY COMMENT?


    • The Phantom Shane
      The Phantom Shane 11 месяцев назад

      No one cares about your opinion :D


    • BottleNext
      BottleNext 11 месяцев назад

      I AGREE!


  • Leone Furlan
    Leone Furlan 11 месяцев назад

    really cool case!
    But,very weird,they could have improved the cooling by 70% with adding mesh - ed parts to the middle of can,and on this top/cover,the air would flow freely then,and gpu would get fresh clean air from outside...

    • Maarten Rietveld
      Maarten Rietveld 11 месяцев назад

      The cooling would be improved but the case would then not add the extra value of being able to be super quiet. This case makes the components more quiet then they are themselves.
      One central intake on the top with a dust filter is also a way to gaurantee easy and low maintenance.


  • Mr Mister
    Mr Mister 11 месяцев назад

    I know it's irrelevant but does anyone know if the Lian Li PC-07s can fit the msi godlike gaming carbon? Can't figure it out

  • Daniel Z
    Daniel Z 11 месяцев назад

    that's some good editing man

  • Lard British
    Lard British 11 месяцев назад

    At 0:26 you say you can use any type of ITX motherboard. I believe it's made for mini ITX and anything larger won't fit.

    • BottleNext
      BottleNext 11 месяцев назад

      Mini-itx is the largest itx board there is.
      Mini-ITX (170×170mm) -- Pico-ITX (100×72mm) -- mobile-ITX (60×60mm)


  • Abdullah Abdulaziz
    Abdullah Abdulaziz 11 месяцев назад

    a good start but definitely needs improving

  • Mason Vanderpool
    Mason Vanderpool 11 месяцев назад +1

    This case is so flawed.

    Here are my suggestions.

    1) The case should be perforated to let the system breathe.

    2) The case needs to be made of metal.

    3) The GPU needs to be mounted on the other side of the motherboard.

    4) The top needs to be either perforated or mesh.

    This case is total shit when you look at the possibilities.
    Also, the price is outrageous. I can guarantee that this was not some kind of engineering feat and the manufacturers are simply price gouging because there aren't cases like this elsewhere.

    • I'm Poncho Bear
      I'm Poncho Bear 4 месяца назад

      Mason Vanderpool the roast.


    • Leone Furlan
      Leone Furlan 11 месяцев назад

      +BottleNext well,however it is,(as seen in the comments) i think you have a pretty substantial audience for your product!!! Ppl will buy it for sure,even more if the thermals are good as you say! And youre 100% right about its silly to comment on something youre not informed enough,but,this is the ytb,and its wors section,lowest of the low: ytb comment section!!! Dont expect anything less but idiotic opinions from pire idiots (myself included)! Thats just the way it is!
      P.S.but,do you know how coolermaster did their best-selling ever case (cm5 or something)? They did cm4,and before producing cm5 they checked this kind of comments and users opinions,then upgraded all the things ppl complained about on the cm4,and voila,their best ever case was made...


    • BottleNext
      BottleNext 11 месяцев назад

      @Mason Vanderpool

      Thank you for your opinion. Entropy is designed so that it can be really quiet for when you are studying or hanging out on YouTube commenting on how shit things are without being really informed. You can adjust the top lid and bottom feet so that even high powered systems can be cooled properly.

      1) If it was perforated it wouldn't look good and make more noise.
      2) Metal is a group of materials which include Iron. Steel is a mixture of iron and carbon that is much stronger and doesn't rust as fast as iron would.
      You could call it Carbon Reinforced Iron or "CRI" in made up marketing terms.

      3) It couldn't be this small if the gpu was finstalled behind the motherboard
      4) The top will be perforated after you take of the top lid. (seen in latest render video on our channel)

      5) The price is this like this because its made in the Netherlands and the minimum wage is really high here. 10 dollars an hour +60% insurance and other costs. Also making the custom tools to make a perfect outer shell are 32% of what we are trying to raise.

      You did actually help me improve my communication; that's why we've took the time to answer all your concerns.


    • Leone Furlan
      Leone Furlan 11 месяцев назад

      SAME,jast adding mesh parts would improve airflow & temp by 100%!
      But you say gpu on other side of mobo,where would you place the psu then??? Bcs the psu is the biggest space-taker,so they placed it in bigest compartment (behind mobo)


  • danyal bhatti
    danyal bhatti 11 месяцев назад

    Hey Waj what monitor do you use? I know its a random question, but im looking for an upgrade and saw your dell monitor.

  • Yollie Onsky
    Yollie Onsky 11 месяцев назад

    Dune Case not even launch till date which more elegant than this case

    • Isaac G
      Isaac G 11 месяцев назад

      it died in march


  • Jason Almont
    Jason Almont 11 месяцев назад

    I'd like to see more mini itx non standard options.

  • Alex Deng
    Alex Deng 11 месяцев назад

    This is probably for lazy people who don't want to mod a trash can.

  • Mel Anisiobi
    Mel Anisiobi 11 месяцев назад

    ...or use pringles container

  • Spacedave2000
    Spacedave2000 11 месяцев назад

    I can imagine this thing is going to sub as a heater for winter!! The amount of heat it must have to push up is staggering to think about!

  • acnfanmanin
    acnfanmanin 11 месяцев назад

    You know the top fan was on intake right and that's how it's supposed to be.

  • MadGamer343
    MadGamer343 11 месяцев назад

    not my cup of tea

  • HeavyLikesSandwich
    HeavyLikesSandwich 11 месяцев назад

    Not worth it for gaming at all with everything crammed in there running hot and probably gives you a less than average gaming machine, Maybe as a general use PC.

    • CheapSushi
      CheapSushi 11 месяцев назад

      That was mentioned in the video.


  • hectec69
    hectec69 11 месяцев назад

    I get one make a cool portable rig

  • Picasso Pablo
    Picasso Pablo 11 месяцев назад +2

    seriously, the gpu right above the cpu cooler? no in-take 140mm fan only out-take?
    no thanks.. design is the second thing they should be worry about.

    • carlos b
      carlos b 11 месяцев назад

      the gpu is below the fan the 140mm fan is mounted on the top and the fan and that is and intake fan not trying to be rude just i think you got were the components are confused


    • H31MU7
      H31MU7 11 месяцев назад

      have a closer look at that top fan when he shows it


  • Mohamad rahmath ali
    Mohamad rahmath ali 11 месяцев назад

    i know it too much to ask but if they can increase the height and include liquid cooling then it will be awesome. just flip the graphics card and design a hybrid water block for cpu and graphics card. easier said than done having quite a few graphics card.

  • Hami101
    Hami101 11 месяцев назад +63

    $160 for a trash can seems excessive.

    • I'm Poncho Bear
      I'm Poncho Bear 4 месяца назад

      Maarten Rietveld I'd buy it...


    • Maarten Rietveld
      Maarten Rietveld 11 месяцев назад

      1. The reason why its upvoted is because its funny to call it a trash can. But what is not funny is to moan about a pricetag.
      2. Did I ask Waj to change the settings so that the latest messages shows on top instead of yours? No... I respect freedom of speech.
      3. I know it looks like a trashcan. I never claimed it didn't
      4. look the price on the White Knight Pi from Japan and the price of the dead Dune Case.
      I didn't expect you to remove it since being the top comment must mean a lot to you.
      I'm just so deticaded to this project that i'll try anything to make it happen.
      5. You are calling yourself a culture? most comments are postive go read them.
      Ask and you might receive. Have a nice day Hami101.


    • Hami101
      Hami101 11 месяцев назад

      +Maarten Rietveld
      1. The reason my comment is on top is due to the amount of people who agree with me from the likes.
      2. Is a lack of Freedom of Speech to promote private industry also a staple in the Netherlands?
      3. 83% of people voted that your case looks like a trashcan
      https://imgur.com/UJtQ45t
      4. The only other result wasn't that much better.
      5. Welcome to the internet, as case manufacturers I would expect you to understand our culture better.
      6. I'm only trying to be unbiased since everyone called the Mac Pro a trash can


    • Maarten Rietveld
      Maarten Rietveld 11 месяцев назад

      BottleNext here on different account.
      1 Its not the same shape so that mould is useless
      2 that Trashcan is only made out of two pieces which are only held together by gravity
      3 that product is 10 years old so ofcourse the price had more time to drop
      4 minimum wage in the netherlands is 11$ an hour
      5 there are many trashcans more expensive then 160$
      6 the price might seem excessive but its not

      Please delete your comment as it can be harmfull to the campaign.
      Its the first thing people see now even though the most comments are positive or worried about termals.


  • Stephen Cain
    Stephen Cain 11 месяцев назад

    they need to make it alil taller id like to see the ability to run a full size founders card

  • Lam Kim
    Lam Kim 11 месяцев назад

    do an updated hackintosh pro itx in this case

  • Diet Coke Killer
    Diet Coke Killer 11 месяцев назад

    I don't get how people think cases like these and the Mac pro looks good. They look like trash cans.

    • BottleNext
      BottleNext 11 месяцев назад

      Yea its confusing. I already broke one of my fans because i threw my trash in my Entropy case.


  • Larry White
    Larry White 11 месяцев назад

    I realy like this case

  • Connor Godshall
    Connor Godshall 11 месяцев назад +1

    I really like this case, would love to throw a nano in there!
    Toooooo bad I can't afford the case let alone a nano lol

  • T. ten Haaf
    T. ten Haaf 11 месяцев назад

    yeah netherlands
    Nice video and nice case

  • T. ten Haaf
    T. ten Haaf 11 месяцев назад

    yeah netherlands
    Nice video and nice case

  • kmg501
    kmg501 11 месяцев назад

    I like it, I would definitely consider it if I was in the market for a new build.

  • Jean Sen
    Jean Sen 11 месяцев назад

    the PSU must be relocated or the cpu wont properly be cooled.

  • Alex Howe
    Alex Howe 11 месяцев назад

    needs a window for the GPU or mesh

  • Daniel Vu
    Daniel Vu 11 месяцев назад +1

    will these come in black or different colors?

    • Multiscan0001
      Multiscan0001 11 месяцев назад

      I was thinking the same thing. I don't like the the white colour.


    • Isaac G
      Isaac G 11 месяцев назад

      yes


  • DulCore
    DulCore 11 месяцев назад

    More like Bottleneck haha amirite

  • Yuden de MLG
    Yuden de MLG 11 месяцев назад

    If I had this i would drill some small holes in front of GPU for some additional fresh air inside of case ;-)

  • valued opinions
    valued opinions 11 месяцев назад +1

    euros 150, what a rip off

  • Christianspiller
    Christianspiller 11 месяцев назад

    This seems like its a really legit kickstarter and the case seems to be pretty Nice

  • Patrick Williamson
    Patrick Williamson 11 месяцев назад

    I hope they do something about the mounts.....idk if its just me but it looks like if this case fell to the ground everything would just fall apart.

  • Frequency
    Frequency 11 месяцев назад +1

    The fan is upside down in the video....

  • Allan Hof
    Allan Hof 11 месяцев назад

    Looks nice

  • Kubas Inko
    Kubas Inko 11 месяцев назад

    awesome and super small

  • Il _Blu_ Biandretti
    Il _Blu_ Biandretti 11 месяцев назад

    dust filter!!!! say to them to apply dust filter

  • XInfinity2013 - CertifiedGaming
    XInfinity2013 - CertifiedGaming 11 месяцев назад +2

    After looking at it and converting their money to here I'd rather 3d print or buy a trash can to build my own then spend $226.40.

    • XInfinity2013 - CertifiedGaming
      XInfinity2013 - CertifiedGaming 11 месяцев назад

      +GackylGhaster It is in Canadian because there is only a $0.82 difference in price between Canada and Australia.


    • GackylGhaster
      GackylGhaster 11 месяцев назад

      Australian dollars or Canadian dollars? because in american dollars it's 166$


  • Nate
    Nate 11 месяцев назад

    is it just me, or does anyone else sense an apple lawsuit inbound (looks pretty much like the Mac pro)

    • Augusto A. Santos
      Augusto A. Santos 11 месяцев назад

      I was thinking about it...


    • XInfinity2013 - CertifiedGaming
      XInfinity2013 - CertifiedGaming 11 месяцев назад

      I don't think (as far as I know but I could be wrong) Apple can't sue them because there are house hold trash cans that are the same shape as the 2013 Mac Pro before it was made.


  • Rob Leonard
    Rob Leonard 11 месяцев назад +1

    Would have been nice if you could have given us some examples of thermals for the CPU and GPU to give us an idea of how hot it runs

Seo